Marásszerszámok
Az YG-1 marószerszámai
Az YG-1 marószerszámainak ismertségét az adja, hogy világ leginkább költséghaté
kony forgácsolószerszámok közé tartoznak,
és számos felhasználót tölt el megelégedéssel az általuk nyújtott drasztikus termelékenységjavulás.
Hírnevük továbbá a kiváló teljesítményen és a legkülönbözőbb termékeken alapul. Rendkívül sok alapanyaghoz és számos alkalmazásra kínálunk megoldást.
- Highest Accuracy for all Semi/Fine-Finishing application challenges
- Extensive Portfolio perfectly serving the Die&Mold Industry needs
- Latest Substrate and Coating Technology for predictive and extraordinary Tool Life
- Ball Nose
- Ball with Neck
- Taper Neck Ball
- Corner Radius with Neck
- Square with Neck
- Ultra dense PVD coating with optimal thermal resistance & added strength for general purpose.
- For High Hardened Steel(up to HRc70), Mirror Finish
- Superior tool life compared with carbide E/M
- Excellent heat resistance
- 2 Flute Corner Radius
-
2 Flute
Ball
- YG-1’s special technology coating
- For High Hardened, Pre-Hardened Steels, Stainless Steels, Aluminum, and Graphite
- Ball, Corner Radius, Full Radius(220˚), High Feed
- For stainless steels (XMB130A) 1 Tooth Over Type (Big Chip pocket)
- For Graphite / Diamond Coated (XMB110D, XMR110D) High Rake Angle (Sharp Cutting Edge)
- For High Hardened Steels (XMB260T, XMR260T) Helical(Ball), Straight(C/R) Gash(Negative Rake)
- Full Radius (XMM110V) Precise Copy milling (Straight Gash)
- High Feed Insert (XMF110V)
- YG-1’s “Y” technology coating
- Pre-Hardened Steel (~HRc45), Carbon Steels, Alloy Steels, Cast iron
- Modular type tools can decrease manufacturing cost due to changing modular part only, and can increase stock removal rate than insert tip type tools
- 2 Flute Ball
- 4Flute Corner Radius
- 6Flute Square & Corner Radius
- For High Hardened Steel(HRc50~70)
- High Speed Machining, Dry Cutting
- YG-1’s silicon based technology coating
-
X5070 General
-
Ball for Rib
2 Flute -
2,3,4 Flute
Ball - 2 Flute Miniature Corner Radius
- 2 & 4 Flute Corner Radius
-
6 Flute 45˚
Helix - 2 Flute Corner Radius for Rib
-
High Feed
-
4 Flute 0˚
Helix
- YG-1’s “Y” technology coating
- High speed Machining for Pre-Hardened Steel up to HRc55
- Unique flute design for excellent chip evacuation and vibration reduction.
- Optimal roughing tooth profile to reduce cutting forces.
- Special tool geometry for high feed rate and heavy cutting.
- Strong end tooth design for plunge and pocket milling.
- Custom engineered coating to allow long tool life and excellent chip evacuation.
- 2 Flute Ball
-
2, 4 Flute 30˚ Helix Square
End Mill - 6 Flute 45˚ Helix Square End Mill
- 2, 4 Flute 30˚ Helix Corner Radius
- 4, 5 Flute Multiple Helix Corner Radius
- Mold & Die for Pre-Hardened Steels up to HRc55
- Dry & Wet Cutting with high speed machining
- Excellent for high precision finishing
- 2,4 Flute Ball
- 2 Flute Ball for Rib
- 2,4 Flute Corner Radius
- 2 Flute Corner Radius for Rib
- 2, 4 Flute
- 2 Flute for Rib
- 3 Flute 38 ° Helix Short Length
- 6 & 8 Flute 45° Helix
- Multi Flute 20° Helix Long Length Roughing-Fine
- YG-1’s “Y” technology coating
- For Stainless Steels, Titanium, Super Alloys, and Steels
- High speed machining for Titanium, Inconel, and Stainless Steels
- 4 Flute Corner Radius with Double Core
- 5 Flute Corner Radius
- 5 Flute 40˚ Helix Rougher (Only Europe)
- Excellent performance for machining low hardness steels to medium hardness steels and tough materials.
- High helix and deep flute can help to cut very low thermal conductivity materials like Titanium, nickel based alloys and cobalt alloys
- 2, 4 Flute End Mill
- 3&4 Flute 50˚ Helix End Mill
- 6&8 Flute 45˚ Helix End Mill
- Multi Flute Roughing
- YG-1’s “Y” technology coating
- Steel, Cast Iron, Stainless Steel
- Heavy Cutting
- 4Flute Multiple Helix Ball
- 4Flute Multiple Helix (Square, Corner Radius)
- 6Flute Multiple Helix (Square, Corner Radius)
- 3 Flute
- Square End & Corner Radius
- Standard and Extended Length
- Coated and Uncoated
- 3 Flue Helix Corner Radius
- 3 Flue Helix Square
- Bright and TiCN Coated
- For Aluminum Alloys
- Mirror surface – Excellent surface Finishes
- 1 Fl. End Mill
- 2, 3 Flute Ball
- 2, 3Flute 45˚ Helix
- 3Flute Roughing
- YG-1’s Diamond technology coating
- High performance on graphite and composite materials including CFRP, GFRP
- Excellent surface finish due to high speed
-
For Graphite
- 2 Fl. Ball Nose (with Neck/ Taper Neck)
- 2Fl. Square & Corner Radius End Mill
- 3Fl. 40˚ Helix Corner Radius End Mill
- 4Fl. Corner Radius End Mill
-
For CFRP
- Multi Flute Dual Helix
- 4 Flute 15˚ Helix
- For composite Materials – CFRP, GFRP
- Reduce delamination and burrs
- Excellent abrasion resistance due to Diamond Coating
- ROUTER
- YG-1’s “Y” technology coating
- Replace Coated Solid Carbide End Mill with same Cutting Conditions
- Better Performance than Coated Solid Carbide End Mills for Both CNC machining center & Conventional machine due to the excellent Toughness
- 2 Flute 30˚ Helix Ball
- 2, 3, 4Flute 30˚ Helix
- 4Flute Multiple Helix
- Multi Flute Roughing
- Optimal chip formation and evacuation
- For Titanium and Titanium Alloys
- Heavy Cutting
- Variable face profile & sinusoidal(wave) cutting edges
- Multi Flute Dual Helix